For Allentown Contractors taking either SPANISH or ENGLISH training

If you are using a Apple OS or Android OS mobile device please click on the button below for the proper instructions.

This will take you to a new page

Instructions

System Requirements

Operating System

Mac OS x 10.10

Windows 7, 8, 8.1 and 10.1

Browsers

  • Google Chrome version 43 and above.

  • Internet Explorer version 11 and above (A few users have reported issues with modules not loading. Sign out and try another browser if this happens)

  • Safari version 8.0.6 and above.

    • NOTE: Safari 11 may block audio by default. Under “Safari” tab click “settings for this website” then “Auto-play”  set to “Allow All Auto-Play
  • Windows 10.1 Edge and above.

  • NOTE: Dunkirk Contractors need to ensure that FLASHPLAYER is enabled and updated in their browser!

At the bottom of this page is where you can access the training website.

Technical support contact information at bottom of this page. Please review the instructions below before contacting technical support.

You will see this screen. Click on Get an Adobe ID

If you do not have an email address please make one up. As long as it has ______________@nomail.com so that the system recognizes it as an email address. If you use a “fake” email address you will not be able to recover a forgotten password or get alerts when your training is coming due.

Next you will see this screen.

Enter your:

Full first and last name This must match your government photo ID

Your Email address

Password

Country

Birthdate, you must be at least 18 years of age

Click the “sign up” button

 

 

 

 

Click the box next to “I have read and agree to…”

Click on “Visit” to begin

Click “Start”

For the Allentown Facility only. When you start the training you will see a copy of the “Contractor Safety and Compliance Handbook.

Please read to the end of this document. You can not go to the training until you have reached the end of this document.

Click anywhere on Page 25 to indicate you have read the document and you will be allowed to continue.

When you are done reading the handbook click on the forward arrow near the bottom of the screen, indicated by the yellow arrow. This will take you to Part 1 of the training.

Once you have passed the quiz in the Nestlé Purina Contractor Safety Training module, you can go on to the Nestlé Purina GMP Training module by clicking on the forward arrow at the bottom of the screen.

If you fail the quiz you will have to take the training over again. You cannot proceed to the next module until you pass the quiz.

If the training module fails to start click the back arrow then the forward arrow and it should start!

For Dunkirk Only! If training does not start, make sure you have updated your flash player. Go to: get.adobe.com/flashplayer/

At the end of the GMP module you will be able to print a certificate. Please print this before closing your browser.

If you forget to print the certificate, follow the instructions below to print a “Badge” which is the same thing as a certificate.

If you need to print the Certificate later just log back into your account at

For Allentown: http://NPAllentown.captivateprime.com

For Dunkirk:    http://NPDunkirk.captivateprime.com

Click on “Certificates” under “My Achievements”  You can download and print the Badge as a PDF file.

Para estudiantes de español:

Puede cambiar el idioma de la interfaz en la configuración de su perfil.

Please choose the training for the correct facility location.

Listed alphabetically

Allentown Facility

New User Accounts Only

YOU MUST USE THE BUTTONS BELOW FOR ALL NEW ACCOUNTS.

If you are creating multiple accounts for employees, copy the URL link. Paste the link in your browser and start over from this point for each employee. Sign out between each new account.

English Version

ENGLISH Create New User Account Only                  –

OR

Copy and Paste this link:

https://captivateprime.adobe.com/accountiplogin?ipId=2296&accesskey=etgevn723jehk

You will need to create an Adobe ID. Then a user profile.

Version en español

ESPAÑOL Crear nueva cuenta de usuario solamente

O

Copie y pegue este enlace:

https://captivateprime.adobe.com/accountiplogin?ipId=2301&accesskey=cihk2gq8i0dhj

Deberá crear una ID de Adobe. Luego un perfil de usuario.

Account Log In

If you stop the training before it is complete or need to get a copy of your Certificate (Badge), etc.

Please go to:

Allentown Contractor Log In

OR

Copy and paste this link:

http://NPAllentown.captivateprime.com

You will begin where you left off. You will need to log back in with your email address and password.

Dunkirk Facility

New User Accounts Only

 Remember to enable Flashplayer in your browser before starting the training course!

YOU MUST USE THE BUTTON BELOW FOR ALL NEW ACCOUNTS.

If you are creating multiple accounts for employees, copy the URL link. Paste the link in your browser and start over from this point for each employee. Sign out between each new account.

To Create a User Profile and begin the training go to:

 Create New User Account Only

OR

Copy and paste this link:

https://captivateprime.adobe.com/accountiplogin?ipId=2300&accesskey=e2j837c7astdl

You will need to create an Adobe ID. Then a user profile.

Account Log In

If you stop the training before it is complete or need to get a copy of your Certificate (Badge), etc.

Please go to:

Dunkirk Contractor Log In

OR

Copy and paste this link:

http://NPDunkirk.captivateprime.com

You will begin where you left off. You will need to log back in with your email address and password.

Please “sign out” when you are done with the training. This is important if multiple people will be using the same computer for the training.

 

For Nestlé Purina specific questions please contact:

Dunkirk Richard Hughes 716-366-8080 extension 8510

Allentown Thomas Shober 610-398-4881